Script to calculate a deformation with a rotating force vector.
15 years 3 months ago #4009
by Claus
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Replied by Claus on topic Re:Script to calculate a deformation with a rotating force vector.
Patufet wrote:
You could do a few experiments and sort this out, Im never 100% certain on anything regarding Code_Aster, so clearing it up would be nice.
Claus,
thank you for your reply. It seems to me than more than the number of nodes it is the surface itself. To obtain the expected displacement I had to apply the force:
AMPLITUDE/Surface(Top_F) instead of AMPLITUDE.
In my test I applied 1N and expected a displacement of 0.2 mm. I obtained instead a displacement of about 0.128 mm, the surface of Top_F being 0.8x0.8=0.64 mm^2.
The number of nodes of Top_F (excluding F_Point) was 225 in my test.
Regards.<br /><br />Post edited by: Patufet, at: 2010/03/20 22:09
You could do a few experiments and sort this out, Im never 100% certain on anything regarding Code_Aster, so clearing it up would be nice.
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Moderators: catux
Time to create page: 0.116 seconds