×

Notice

The forum is in read only mode.
  1. Forum
  3. Public Forums
  5. Finite Element Modelling - Code_Aster
  7. keyerror

keyerror

  • rui simoes
  • Topic Author
  • Offline
  • Senior Member
  • Senior Member
More
15 years 1 month ago #4210 by rui simoes
keyerror was created by rui simoes
Hi All,

new user here,

i get the following error, every time i run any simple study:

"Unexpected Error
TYPE = exceptions.KeyError
VALUE=6"

i've checked for spaces in path.. none.
i've tried run the study outside salomemeca, with astk... no way.

is there a procedure to check if SalomeMeca instalation is ok?

i'm going nuts over this.

greetings
rui
More
15 years 1 month ago #4211 by Claus
Replied by Claus on topic Re:keyerror
Check paths to folders etc. for starters. Post again if this thread didn't help.

caelinux.com/CMS/index.php?option=com_jo...;id=3479&catid=5
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
  • rui simoes
  • Topic Author
  • Offline
  • Senior Member
  • Senior Member
More
15 years 1 month ago #4214 by rui simoes
Replied by rui simoes on topic Re:keyerror
i've checked. and there are no spaces in path to comm

not even to the folder where all the studies reside.

is there any other explanation?

thanks in advance
rui
More
15 years 1 month ago #4215 by Claus
Replied by Claus on topic Re:keyerror
python postinstall.py checks if everything is ok with the SALOME-MECA installation - it gives an [OK] or [NO]

You can run SALOME-MECA-2010.1-x86_64/aster/bin/astk --check
and see if it raises any errors.

When running a study in ASTK have you checked Help->Message window?

Clean the ~/flasheur folder, run the study and check the files generated in ~/flasheur for errors.

Make sure either 'rsh' or 'ssh' (depending on what you've set in ASTK) can connect to you desktop without password.
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
  • rui simoes
  • Topic Author
  • Offline
  • Senior Member
  • Senior Member
More
15 years 1 month ago #4216 by rui simoes
Replied by rui simoes on topic Re:keyerror
thanks Claus!

i runned the python command as you said, and now everything is working ok.

still,
i did that after installation (c.a. 2 weeks ago), and i had SalomeMeca working fine by then.
has the instalation detiriorated?

thanks again!
rui
More
15 years 1 month ago #4217 by Claus
Replied by Claus on topic Re:keyerror
rui simoes wrote:

thanks Claus!

i runned the python command as you said, and now everything is working ok.

still,
i did that after installation (c.a. 2 weeks ago), and i had SalomeMeca working fine by then.
has the instalation detiriorated?

thanks again!
rui


ooh I dunno - it might be a package upgrade on your system or something that messed with one of the dependencies of SaloméMECA - very hard to tell, best thing is to completely forget about it and carry on with you life :lol:
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Moderators: catux
  1. Forum
  3. Public Forums
  5. Finite Element Modelling - Code_Aster
  7. keyerror
Time to create page: 0.167 seconds
Powered by Kunena Forum