failure of nonlinear analysis coque_3D
- Josef Kozel
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
13 years 10 months ago #5607
by Josef Kozel
failure of nonlinear analysis coque_3D was created by Josef Kozel
Hello, I tried to calculate nonlinear analysis of membrane floating roof, diameter 46.1[m] and thick 0.005[m], membrane is load by uniform pressure and edge of the membrane is held, I set up RELATION='ELAS', DEFORMATION='GROT_GDEP', but analysis was always aborted and I dont know reason, I appreciate every suggestion....
I attached med, comm and mess file
I attached med, comm and mess file
Attachment membrana.zip not found
- MGolbs
-
- Offline
- Platinum Member
-
13 years 10 months ago #5619
by MGolbs
Dem Überflüssigen nachlaufen, heißt das Wesentliche verpassen.
Jules Saliège
Replied by MGolbs on topic Re:failure of nonlinear analysis coque_3D
Hello,
with code-aster Version is it? I have calculate COQUE_3D modells of plastic tanks and have the experience, that between 10.1 and 10.3 are different's in COMP_ELAS.
Greeting Markus
with code-aster Version is it? I have calculate COQUE_3D modells of plastic tanks and have the experience, that between 10.1 and 10.3 are different's in COMP_ELAS.
Greeting Markus
Dem Überflüssigen nachlaufen, heißt das Wesentliche verpassen.
Jules Saliège
- Josef Kozel
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
13 years 10 months ago #5622
by Josef Kozel
Replied by Josef Kozel on topic Re:failure of nonlinear analysis coque_3D
I use the version 10.2, problem will be probably with the convergence but I dont know whats wrong
Moderators: catux
Time to create page: 0.120 seconds