×
Notice
The forum is in read only mode.
-
Forum
-
Public Forums
-
Finite Element Modelling - Code_Aster
-
Getting started Piston Tutorial
Getting started Piston Tutorial
-
John
-
Topic Author
-
Offline
-
New Member
-
Less
More
-
Posts: 8
-
Thank you received: 0
-
-
9 years 9 months ago #8307
by John
I am trying to do the getting started piston tutorial.
After clicking run I didn't get a green check and beside aster the value is "<A>_ALARM" instead of "ok".
I looked at the linear-static.resu to see if I could find any errors but it is in french.
Is there a version of aster that will print in english?
I notice that for some reason I have Salome 6 and not 5, I don't know if that is a problem.
Any help would be greatly appreciated.
Less
More
-
Posts: 670
-
Thank you received: 34
-
-
9 years 9 months ago #8308
by Claus
Use Google translate for the errors and/or post it here, and we'll have a look at it
/C
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
-
John
-
Topic Author
-
Offline
-
New Member
-
Less
More
-
Posts: 8
-
Thank you received: 0
-
-
9 years 9 months ago #8309
by John
When google translating I came across this link that had a similar problem.
www.code-aster.org/forum2/viewtopic.php?id=16433
I was still able to continue with the results. So I don't know what the alarm was about.
Is there a version in english? or is google translate the only option?
Less
More
-
Posts: 670
-
Thank you received: 34
-
-
9 years 9 months ago #8311
by Claus
Google translate is the best option short of learning the French language
The English version has worked for a while, then stopped working...then... well it is a little unclear for me what the status is right now.
/C
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
-
Forum
-
Public Forums
-
Finite Element Modelling - Code_Aster
-
Getting started Piston Tutorial
Time to create page: 0.124 seconds
