Visualisation of correct BEAM orientation

Hi to everybody,

When I am postprocessing a BEAM model, I need to understand if the beam orientation I assigned in Aster is correct (i.e. to check if beam section axes are correctly oriented).
But Salomè has only wireframe mode to visualize a beam model.
Is there some way to do it?

If there is no possibility at moment, this is a suggestion to improve it.

Thanks in advance for your help.

Luigi

Maybe my first message was not correct...

The beam is not a solid, it is a wire, only the axes is displayed. I assigned mechanical characteristics to the section and performed analysis, but in postpro module I can visualize only one axes (or wire).
So, I cannot visualize if section characteristics are correct, for sample, I cannot check if the section axes are correctly oriented (typical error is rotate the section to 90°).

I hope the situation now is clear, thanks a lot for your help.

Luigi

Claus wrote:

Any chance you can upload the result-files so we can look at it - personally I can't come up with a solution without looking at it

Hi Claus, in attachment there is the Beam Test file.
Thanks in advance for your help.

Ciao, Luigi