comm files for code-aster verifications
- Johan Stadler
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 22
- Thank you received: 1
10 years 5 months ago #7759
by Johan Stadler
comm files for code-aster verifications was created by Johan Stadler
Is it possible to get hold of the comm files used for the code-aster verifications? I am specifically looking for the command file for SDLS505 (Cylinder buckling).
Thanks
Thanks
- Claus
-
- Offline
- Moderator
-
Less
More
- Posts: 670
- Thank you received: 34
10 years 5 months ago #7760
by Claus
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Replied by Claus on topic Re: comm files for code-aster verifications
98% of them are available in the Code_Aster source archive you can download at code-aster.org.
A few are restricted for internal use and a few are to large to include in the archive, in case you're missing some.
/C
A few are restricted for internal use and a few are to large to include in the archive, in case you're missing some.
/C
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
- Johan Stadler
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 22
- Thank you received: 1
10 years 5 months ago #7763
by Johan Stadler
Replied by Johan Stadler on topic Re: comm files for code-aster verifications
Claws
Thanks for the prompt response.
I have downloaded "Documentation stable" but this appears to be the same as the documents under the Documentation tab on the CA website. Is this the right file?
I was really hoping to find something that gives me the comm file, from debut to fin, used for the verification. Or is what I am looking for perhaps in the 2%.
Thanks for the prompt response.
I have downloaded "Documentation stable" but this appears to be the same as the documents under the Documentation tab on the CA website. Is this the right file?
I was really hoping to find something that gives me the comm file, from debut to fin, used for the verification. Or is what I am looking for perhaps in the 2%.
- kwou
-
- Offline
- Moderator
-
10 years 5 months ago - 10 years 5 months ago #7767
by kwou
Interest: structural mechanics, solar energy (picture at 'my location' shows too little pv panels)
--
kind regards - kees
Replied by kwou on topic Re: comm files for code-aster verifications
hoi Johan
in the C-Aster directory:
versionnumber/share/aster/tests/....comm all the comm files are available.
(eg ..../11.6/share/aster/tests/zzzz353a.com is my first comm file (ordered by name, descending).)
And a bit of teasing, this is from sdls505a.comm, so not SDLS505.comm:
Have fun.
in the C-Aster directory:
versionnumber/share/aster/tests/....comm all the comm files are available.
(eg ..../11.6/share/aster/tests/zzzz353a.com is my first comm file (ordered by name, descending).)
And a bit of teasing, this is from sdls505a.comm, so not SDLS505.comm:
....
RESULT=MODE_ITER_SIMULT(MATR_RIGI=MAS_RI_M,
MATR_RIGI_GEOM=MAS_RI_G,
METHODE='SORENSEN',
TYPE_RESU='MODE_FLAMB',
CALC_CHAR_CRIT=_F(OPTION='PLUS_PETITE',),
VERI_MODE=_F(SEUIL=1.E-5,),);
Have fun.
Interest: structural mechanics, solar energy (picture at 'my location' shows too little pv panels)
--
kind regards - kees
Last edit: 10 years 5 months ago by kwou.
The following user(s) said Thank You: Johan Stadler
- Johan Stadler
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 22
- Thank you received: 1
10 years 5 months ago #7769
by Johan Stadler
Replied by Johan Stadler on topic Re: comm files for code-aster verifications
Thanks Kees, I found it. Hopefully I can now make my model buckle correctly.
Moderators: catux
Time to create page: 0.137 seconds