Nonlinear pressure on solidelement
- Cam
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
14 years 5 months ago #4154
by Cam
Nonlinear pressure on solidelement was created by Cam
Hi people
Is it possible to create nonlinear pressure on solidelements. For example: A damconstruction where the waterpressure goes from 0 on the top and then increasing to 0.1 MPa on the bottom of the dam.
Thanks in advance
Is it possible to create nonlinear pressure on solidelements. For example: A damconstruction where the waterpressure goes from 0 on the top and then increasing to 0.1 MPa on the bottom of the dam.
Thanks in advance
- Claus
-
- Offline
- Moderator
-
Less
More
- Posts: 670
- Thank you received: 34
14 years 5 months ago #4155
by Claus
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Replied by Claus on topic Re:Nonlinear pressure on solidelement
Yes it is. Have a look at this document
www.code-aster.org/V2/spip.php?article53
U1.05.00-C Simple operating example Charles Luzzato ended 01/09/2008
Be warned though, the document is old(ish) and the syntax might have changed, but it should nudge you in the right direction. I haven't tried the example myself yet.
Regards,
Claus
www.code-aster.org/V2/spip.php?article53
U1.05.00-C Simple operating example Charles Luzzato ended 01/09/2008
Be warned though, the document is old(ish) and the syntax might have changed, but it should nudge you in the right direction. I haven't tried the example myself yet.
Regards,
Claus
Code_Aster release : STA11.4 on OpenSUSE 12.3 64 bits - EDF/Intel version
Moderators: catux
Time to create page: 0.124 seconds