dynamic analysis

Hoi Abhiskhek

have a look here:
www.caelinux.org/wiki/index.php/Contrib:...uters/prestressmodal

(just ommit the preload part).
And let me know if you have any problems in case you try.

Kind regards - kees

<br /><br />Post edited by: Kees Wouters, at: 2011/05/21 09:08

Hoi abhishek

-Export the med file in the mesh module under cylinder.med
kw_cylinder.zip does not contain cylinder.med file.

You have to run the python file geom_mesh.py first *). That will generate the model and mesh (*.med) file. Then you can export the *.med file.

and how to load cyl_modal.comm &amp; cyl_loaded.comm for further analysis.
and when exporting to ASTK and run efficas needed.

The *.comm files are easiest loaded by ASTK. So start ASTK and load the corresponding *.astk file (you might have to crrect the directories). Hit the run-button in ASTK. That should do the job.

Eficas is not needed, that checks the syntax of the command file. That is okee (although never versions of C-Aster may differ once and a while).

If this is not clear enough, pls let me/us know. Glad to give more detailed information.

*) in Salome select geometry module --&gt; then 'load script' (or cntrl T) --&gt; select geom_mesh.py.
This will generate cylinder.med --&gt; select mesh module --&gt; select cylinder in the mesh browser --&gt; export mesh --&gt; (med) --&gt; save.

kind regards - kees<br /><br />Post edited by: Kees Wouters, at: 2011/05/21 17:18