×

Notice

The forum is in read only mode.

[SOLVED] Do an example without salome-meca2009.1

  • wwiki
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
14 years 4 months ago #3819 by wwiki
Replied by wwiki on topic Re:Do an example without salome-meca2009.1
Hello ,

I have checked all possibilities.
I have only to run in flasheur btc file.
After that Beamres.med is generated.

I don't understand why !!!

Best Regards.
  • wwiki
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
14 years 4 months ago #3820 by wwiki
Replied by wwiki on topic Re:Do an example without salome-meca2009.1
Hello ,

I have checked all possibilities.
I have only to run in flasheur btc file.
After that Beamres.med is generated.

I don't understand why !!!

Best Regards.
  • wwiki
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
14 years 4 months ago #3821 by wwiki
Replied by wwiki on topic Re:Do an example without salome-meca2009.1
.

Attachment BeamOutput.gz not found

Attachments:
More
14 years 4 months ago #3826 by Alessandro
Replied by Alessandro on topic Re:Do an example without salome-meca2009.1
Do you see the shell window that shows the progress of the calculation? The window should open automatically when you press "RUN" in the ASTK gui, if you have marked the checkbox "interactive followup".

I guess that there is a problem of communication between client and server. What is the message of end of calculation? If it is "Ended_OK" or "Ended_ALARM" it means that Aster works. If it is "Ended_" it means that Aster doesn't work.
  • wwiki
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
14 years 4 months ago #3829 by wwiki
Replied by wwiki on topic Re:Do an example without salome-meca2009.1
Hello Alessandro,

You saw just.

My message stops to ENDED _

:blush:
More
14 years 4 months ago #3830 by Alessandro
Replied by Alessandro on topic Re:Do an example without salome-meca2009.1
wwiki wrote:

Hello Alessandro,

You saw just.

My message stops to ENDED _

:blush:


Do you see the text window scrolling during calculation? If no, your problem is quite certanly that the X-server does not allow TCP connections (let me divine: you are on Ubuntu).

If yes, look at the /home/username/flasheur directory. There are several text files, may be that you will find the problem reading them carefully.

Last thing: check to have enough free space on the root partition. Salometimes Aster fails due to not enough room left on the device for the temporary files.
Moderators: catux
Time to create page: 0.119 seconds
Powered by Kunena Forum